Flange Mount Connectors
Our 50-Ohm hermetic flange mount adaptable connectors are designed for use in military and commercial applications where environmental conditions require an extremely rugged and reliable hermetic seal. Low-loss Corning 7070 glass is used for dependable electrical performance. PA&E manufactures these connectors from a variety of compatible shell and contact materials, in both laser weld and solder-in styles, which provide excellent electrical and environmental performance characteristics.
Download RF/Microwave Connectors Data Sheet (PDF 384 KB)
PAE-RF Series 100 -50 Ohm Flange Mount, Standard Performance
Aluminum Compatible
0-92481 (Ø.020" Pin - Sales Drawing) (PDF 139 KB)
0-92482 (Ø.015" Pin - Sales Drawing) (PDF 80 KB)
0-92613 (Ø.012" Pin - Sales Drawing) (PDF 116 KB)
Titanium Compatible
0-93157 (Ø.020" Pin - Sales Drawing) (PDF 64 KB)
PAE-RF Series 150 -50 Ohm Flange Mount, High Performance
Aluminum Compatible
0-93979 (Ø.020" Pin - Sales Drawing) (PDF 69 KB)
0-93997 (Ø.053" Pin - Sales Drawing) (PDF 70 KB)
0-94003 (Ø.015" Pin - Sales Drawing) (PDF 65 KB)
0-94015 (Ø.012" Pin - Sales Drawing) (PDF 140 KB)
Titanium Compatible
0-94090 (Ø.020" Pin - Sales Drawing) (PDF 76 KB)
0-94091 (Ø.015" Pin - Sales Drawing) (PDF 76 KB)
0-94092 (Ø.012" Pin - Sales Drawing) (PDF 76 KB)
Flange Mount Connector Specifications and Testing Configuration
|
PERFORMANCE CONFIGURATIONS |
FLANGE MOUNT |
|
SPECIFICATIONS |
MATERIAL COMPATIBILITY |
Designed for Aluminum, Titanium or Iron/Nickel Alloy applications |
|
CONTACT MATERIAL |
Iron/Nickel Alloys |
|
SHELL FINISH OPTIONS |
Passivated, Nickel/Gold Plated or Chromate Conversion Coated as applicable |
|
CONTACT FINISH |
Nickel/Gold Plating |
|
PIN DIAMETER OPTIONS |
.012", .015", .018", .020" and Custom |
|
INTERFACE |
Per MIL-STD-348 |
|
NOMINAL IMPEDANCE |
50 Ohms |
|
PERFORMANCE |
LEAK RATE |
Less than 1X10-9cc/sec Helium at 1 atmospheric differential pressure |
|
INSULATION RESISTANCE |
Connectors provide greater than 5,000 Megohms at 500 VDC when tested in IAW MIL-STD-1344, Method 3003 |
|
DIELECTRIC WITHSTANDING VOLTAGE |
Connectors exhibit no evidence of breakdown or flashover when tested in IAW MIL-STD-1344, Method 3003 |
|
CORROSION |
Connectors meet salt spray test in IAW MIL-STD-1344, Method 3003 |
|
OPERATING TEMPERATURE |
-65°C to 200°C |
| 
